Captain Gypsum & Frames Pvt. Ltd is one of the leading manufacturers and suppliers of gypsum-based products and metal framing products. We have been in the business for over ten years and have established ourselves as a trusted name in the industry by supplying our products to some of the biggest names in the industry.
MANUFACTURERS & SUPPLIERS OF
CAPTAIN BOND is used to bond new gypsum plaster to concrete, on any structurally sound surface, interior or exterior. It is designed to provide excellent bonding & a high open time, while application, giving you ample freedom to make structural alterations
• Great workability: The bonding agent is easy to use and takes little time, as it can be applied in a single coat
• Strong and durable: Very strong mechanical cum chemical bond is created
• High visibility: The green colour of BONDIT gives it good visibility.
• Crack resistant: When applied on concrete surface, it requires no hacking, and hence gives no room for cracks, saving time and labour.
• Mix the contents before use.
• Apply onto dry concrete blocks/RCC, using a roller / brush.
• Apply gypsum plaster, 24 hours or after the material has dried based on environmental conditions
| Appearance | Green Liquid |
| Specific Gravity | 1.00 - 0.005 |
| Coverage | 50 to 65 sq.it. per kg for single coat (May vary with substrate condition) |
| Shelf Life | Packaging |
| 6 months in ideal storage | 1,5,10 & 20 kg. |
• Customer Centric
• Design Oriented.
• Quality on top priority
• Integrity and Accountability.
Wash your hands with soap after application, or use hand gloves. If the content goes into your eyes, wash with water continuously till the burning stops. If the burning persists, visit a doctor, immediately.
CAPTAIN ONE COAT" PLASTER is manufactured specifically for thin surface- finishing coat application on a wall that is leveled or plastered with sand and cement, to provide a very smooth but sturdy and durable surface.
• Easy to apply: Augmented with Calcium Sulphate Hemi Hydrate, the plaster is known for its great coverage ability, and is easy to work with.
• Shrinkage-resistant, strong bonding: The plaster has a gradual setting time of 10 to 15 minutes and attains full strength once set, without any shrinkage cracks.
• Low density and higher coverage: Since it has low density, a 25kg bag of plaster can cover an area of approx. 20 to 22 sq. It., when applied in 12mm thickness.
• No water curing required: The plaster does not require curing after application, which helps save water and time.
• High endurance level: The plaster makes for a resilient but silky smooth surface that can withstand great impact.
• Low thermal conductivity: Non-combustible, having very low thermal conductivity (K- Value), the plaster is made to protect the walls from thermal damage.
• CAPTAIN ONE COAT" is normally applied in 12mm thickness. It is very easy to mix and apply on the rigid surfaces like plastered walls
• Mark the wall vertically, with level strips, checked with straight edge or line and level by using an aluminum square tube.
• Mark the highest spots with a minimum 3mm thickness to keep the overall thickness under control.
• Wet the wall suitably, at least 10 minutes prior to the application so that all trapped air can be displaced to allow the plaster to attain good contact and strength with the wall.
• While mixing, take care to add the plaster to the water and not the other way around. Use clean potable water to avoid contamination. Mix both to a workable consistency. Once ready, apply the mix to the walls according to the level strips markings.
• For best results, apply a tight coat with firm pressure, using the trowel.
• Plaster the entire surface in line and level it out. Once it starts to set, complete the application with a final stroke of the trowel.
| Captain One Coat | Captain Vermiculite | Captain ++ Super White | |
|---|---|---|---|
| Application | Plastered walls or concrete soffit | Bare brick or concrete surface with normal suction background | Bare brick or concrete surface with normal suction background. |
| Advantages | High purity, very smooth finish & higher coverage. | Direct application on brick wall, strong bonding strength, high coverage with smooth finish. | Direct application on brick wall, strong bonding strength high coverage with very smooth finish. |
| Packaging | 25 kg HDPE Bags | 25 kg HDPE Bags | 25 kg HDPE Bags |
| Finished product Color | Off white | Off white | White |
| Bulk Density | 1200 | 1050 | 1000 |
| Setting Time (Minutes) | 10-20 | 10-20 | 12-18 |
| Coverage in 12 mm Sq.mtr/Ton | 20-22 sq.ft./ 25 kg | 20 sq.ft. 25/kg | 20-25 sq.ft. / 25 kg |
| Surface Finish | Very Smooth | Smooth | Very Smooth |
| Workability | Easier | Easy | Easier |
| Compressive Strength (kg/cm2) | 70-75 | 68-72 | 68-72 |
CAPTAIN VERMICULITE GYPSUM PLASTER is manufactured specifically for thin surface- finishing coat application on a wall that is leveled or plastered with sand and cement, to provide a very smooth but sturdy and durable surface. The plaster dries early. giving no room for abrasions or cracking, allowing you complete freedom to decorate the way you wish.
68-72 kgs/cm2 with powder : water ratio 1:0.65
CAPTAIN ++ Super White Gypsum is an Irani gypsum plaster made for application on almost all backgrounds, e.g. brickwork, block work or concrete, suitable for application like POP punning (over Sand & Cement Plaster), bull marks, level strips, etc. It has special additives for enhanced setting time helps in controlling the onsite wastages. It provides perfectly lined and leveled surface providing a perfectly flat surface ready for painting.
• Extra whiteness
• Coverage of 20-25 Sq. ft / 25 kg at 12 mm thickness*No shrinkage cracks
• Eliminates two-step process of Sand Cement Plaster and POP punning
• Initial setting time of 15 – 20 minutes *
• Low thermal conductivity keeps the room cooler in summer and warmer in winter
• Doesn’t require water curing
• No shrinkage cracks
Calcium Sulphate Hemihydrate: CaS04. ½ H2O
Setting
CAPTAIN ++ Super White Gypsum is packed in PP bags. The outer layer of the bag is printed with the product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions.
25 Kg
Approx. 12 months from the date of manufacturing when stored in dry conditions
Applied Thickness 10 to 12 Coverage* 20-25 sq-ft/25 kg bag
Our Products
The ceiling section is the main supporting section used to fix plasterboard .
The intermediate is the primary section used to support the ceiling section .
The perimeter is normally fixed around walls/partitions .
The ceiling section is the main supporting section used to fix plasterboard .
CAPTAIN FRAMES METAL FRAMING & ACCESSORIES
• Greater load carrying capacity,
• Improved screw retention.
• Improved fire test performance.
• Highly stable and productive.
•Installation benefits: It is faster. safer and easier to install, without any screw stripping or screw riding, It also increases fiction fitting.
• Low thermal conductivity: Non-combustible, having very low thermal conductivity (K- Value), the plaster is made to protect the walls from thermal damage.
• Screw retention test
• Greater material contact.
• Higher yield strength material.
• Improved screw retention, typically up by 15% Plate bending test Surface ribbed finished metal plate test data Typically 25-40% improved load carrying capacity.
• Typically 15-30% improved load carrying capacity *dependant on material properties, *dependant on product geometries
| Captain Frames | Gauge (mm) |
|---|---|
| Ceiling Channel | 0.50 mm |
| Intermediate Channel | 0.90 mm |
| Perimeter | 0.50 mm |
| Ceiling L | 0.50 mm |
| Partition Stud | 0.50 mm |
| Flooring Channel | 0.50 mm |
Contact Us
G-17, Star Heights, Bharat Cinema Compound ,
Near KNS Bank, New Mill
Road, Kurla (West),
captaingypsumand
framepvtltd@gmail.com
24/7 All days
